Device Terminal

Configuration & Measuring Device for R/C Modellers

  • Talk to your Altis at the airfield

    Connect your Altis v4 or Altis micro and you will get new possibilities. You can change the settings or view the online data in on the screen.

  • Battery expert

    You no longer need a separate battery tester. Just connect the device terminal to the battery connector.

  • Check your equipment

    Measure voltages, check PWM signal, move your servomotor. No extra device needed.

  • Elegant form with a practicle strap
1
2
3
4
5
6
1

LCD Display with backlit, 128x64px

2

Momentary switch buttons

3

Communication port for Altis Line Devices or firmware upgrade

4

PWM Input or RPM Input

5

Servo Tester Output

6

Voltage Input or LiPoly Meter Input

Specification

General
  • Dimensions : 71 x 45 x 10mm
  • Weight : 38g
  • Power supply range : 4 – 8.4V
  • Graphical display 128x64px
  • Operating temperature : 0ºC – 50ºC
  • Input voltage range : Cell 1 : 8.4V, Cell 2 – Cell 6 : 0V – 30V
  • Upgradeable firmware
Measuring
  • Li-poly battery 1-6s
  • Voltmeter
  • Servo Tester – Output 50Hz / 1.5ms or 550Hz / 0.75ms
  • PWM Tester
  • RPM Tester
Supported Devices
  • Altis v4
  • Altis v4+
  • Altis Micro
  • Altis GPS

In Action

Accessories

Download

User Manual


English

Slovak

Firmware


FW1.1